Vcr Out Mode; Camera Titles - Philips VidQuad LTC 2372 Installation Instructions Manual

5.5.4 Video Loss Alert
The VIDEO LOSS ALERT function enables you to define if
an alarm is generated when any of the video inputs is
lost/defective.
• Select VIDEO LOSS ALERT and press the
following menu is displayed:
VIDEO LOSS ALERT
(1) CHANNEL 1: ON
(2) CHANNEL 2: ON
(3) CHANNEL 3: OFF
(4) CHANNEL 4: ON
(5) EXIT
• Press the and keys to move the cursor to the
required channel.
• Press the key to toggle the channel ON or OFF.
• Select EXIT and press the
NOTE: To disable the display of the on-screen Vid Loss
message on unused channels, enter the Sequence Setup menu
and set unused channels to the SKIP setting.
5.5.5 Beeper On/Off
The unit incorporates a beeper to alert the operator when an alarm
is generated. You can define whether the beeper is on or off.
• Select BEEPER.
ALARM SETUP
(1) ALARM ON/OFF
(2) ALARM DWELL
(3) ALARM POLARITY
(4) VIDEO LOSS ALERT
(5) BEEPER: ON
(6) EXIT
• Press the key to toggle the function ON or OFF.
• Select EXIT and press the
key. The
key to exit the menu.
key to exit the menu.
5.6 VCR Out Mode (LTC 2377 only)
The VCR OUT MODE defines how the unit's video output to
the VCR or a DVR is recorded, either as quad mode, or as the
selected monitor output.
• Select VCR OUT MODE and press the
following menu is displayed:

VCR OUT MODE

DISPLAY QUAD ONLY
TO EXIT PRESS ENTER KEY
• Press the and
following:
DISPLAY QUAD ONLY: the output to the
VCR/DVR will be quad mode in all conditions.
SAME AS MONITOR OUT: the VCR output will
be the same as the selected monitor output.
• Press the key to exit the menu.
5.7

Camera Titles

You can set up camera titles for each camera input for display
on the monitor. A character set is available for programming
8 character camera titles. These are as follows:
[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][P][Q][R][S]
[T][U][V][W][X][Y][Z][1][2][3][4][5][6][7][8][9][0]
[,][.][:][(][)][-][+][/][space]
• Select CAMERA TITLES and press the
following menu is displayed:
(1) CAMERA 1
(2) CAMERA 2
(3) CAMERA 3
(4) CAMERA 4
(5) DISPLAY: ON
(6) EXIT
• Press the and
required channel.
• Press the key to display the CAMERA TITLE SET
menu.
13
key. The
keys to toggle the mode for the
key. The
CAMERA TITLES
keys to move the cursor to the