Hitachi StarBoard FX-79E1 User Manual page 6

StarBoard FX-79E1/89WE1
Safe Precautions
(1) Precautions Regarding Operation
In order to prevent damage by static electricity, touch a nearby metal object
with your hand to discharge any static electricity before touching this
product.
Do not allow the LED cover surrounding the board to become dirty
or scratched.
Do not use a USB cable extended.
Do not place heavy objects on, pull on, or subject the USB cable to
excess heat.
Always grasp the plug of the USB cable when connecting or
disconnecting.
Always lock the casters with stoppers on the front side after
installing this product.
Do not make modifications.
Do not make any adjustments, repairs, or modifications not given in this
User's'Guide as doing so may lead to personal injury or damage to the
product.
Do not open or remove cover of this product.
Failure to comply may lead to personal injury or damage to the
product. Refer internal inspections, adjustments, and repairs to your
dealer or support center.
Do not place objects on top of this product.
If a foreign object falls on top of or inside this product, it may lead to
personal injury or damage to the product.
Static electricity from your body may cause damage to this product.
If the LED cover becomes dirty or scratched, it may lead to
improper coordinate detection.
Use of a USB cable extended may result in malfunction. Do not use
any cables other than those provided. Furthermore, do not use cables
that are longer than 5m.
Failure to comply may result damage to the USB cable.
Pulling on the USB cable may result in scratching or damage to the cable.
Failure to lock the casters may allow the product to move or slide.
Required Precautions
WARNINGS
CAUTIONS
NOTICE
5
Safe Handling
English