Table of Contents
Advertisement
1 Press OPEN button to pull out the printing mechanism.
1
1
1
1
When it is not working, turn off the power once. Then try to press OPEN button again.
2 Remove the ink cassette with ink sheet.
2
2
2
2
3 Remove the print paper as shown right.
3
3
3
3
4 Cut the defective part of the print paper with scissors.
4
4
4
4
5
5 Cut both edges of the print paper.
5
5
5
6
6
6 Install the print paper. (Refer to pages 12-13.)
6
6
To feed the print paper, press MEMORY button while pressing MONITOR button.
When carrying out this procedure, make sure to press MONITOR button first.
If MEMORY button is pressed first, a new image will be stored in memory and the previously
memorized image will be erased.
OVERCOMING PAPER JAMS
NOTE
2
1
47
Advertisement
Table of Contents
