Advertisement
Connect the DNS-312H NAS To
Your Network
A、First, connect the power adapter to the receptor at the back panel of the DNS-
312H and then plug the other end of the power adapter to a wall outlet or power
strip. The Power LED will turn ON to indicate proper operation.
B、Insert an Ethernet cable to LAN port on the back of the DNS-312H and an
available Ethernet port on the network adapter in the router/switch/hub you will
use to connect to the DNS-312H. The LED light for LAN Port will illuminate to
indicate proper connection. (Please use a straight-through cable to the LAN port)
Please make sure that your Local Area Network is already working properly.
C、USB ports can connect to one USB printer and one USB hard disk. By
connecting to USB printer, DNS-312H will become a printer server and by
connecting to USB hard disk, users can expand one more volume of hard disk.
C.
USB Ports for Printer
Server/ USB HDD
Please use the USB printer cable
to connect the DNS-312H's USB
Port (for printer server) or USB
HDD for additional volume..
Reset Button
Pressing this button
restores the DNS-312H
to its original factory
default settings.
B.
LAN Port
Please use the Ethernet cable
to connect the DNS-312H and
the Router/Switch/hub in the
network
A.
Receptor for
Power
Adapter..
2
Advertisement
