Functions 1; Error Mail Reports/E-Mail Communication - Mitsubishi Electric G-50A Operation Manual

5 Functions 1

5-1 Error mail reports/E-mail communication

Click on [Functions 1] – [E-Mail] in the menu to open the [E-mail] window and make necessary settings to
perform remote monitoring via mail, using error mail report or the maintenance tool.
Click [Save Settings] to send setting data to the G-50A.
Note: The use of the error mail report function requires a separate license registration.
Confirm on the license registration screen (Ch8) that the license registration has been completed.
Note: If the user logs in as a building manager, the operations may be prohibited.
Mail Server Information
Set the mail server/DNS server
information here.
Mail Communication
Setting
Set the address of the mail
recipients here.
Refresh
Read setting data from G-50A.
5-1-1 Entering the E-Mail Information for the G-50A
Enter the E-mail information provided by either the ISP or the
LAN administrator.
Note: When sending E-mail via an ISP, a user contract with the ISP is
required.
Make necessary settings based on the functions that are to be used, using the table below as a reference.
Table 5-1 Items that Require Settings to Be Made (E-Mail Settings of G-50A)
Items
Mail Address
User ID
Password
Interval of checking incoming
mails
Error Mail Report
Functions
No SMTP
Authentication
V
Uses SMTP No SMTP
Authentication Authentication
V
V
V
17
E-Mail settings of G-50A
The E-mail settings of G-50A
are set here.
Error Mail Settings
Set the error mail destination
here.
Save Settings
Send setting data to G-50A.
Mail Communication
Uses SMTP
Authentication
V V
V V
V V
V V