Disassembly - Pioneer CB-A802 Service Manual

5

7.6 DISASSEMBLY

QQ
3 7 63 1515 0
Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury.
Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Note 3: For performing the diagnosis shown below, the following jigs for service is required:
• Jig flexible cable 24P (GGD1111) + Extension board (GGF1575)
Diagnosis of the DVDM Assy
1
Bonnet and Tray Panel
1
Remove the bonnet by removing the eleven screws.
2
Press the STANDBY ON button to turn on the
power.
3
Press the 7 / 0 STOP OPEN/CLOSE button to
open the tray.
4
Remove the tray panel.
5 Press the 7 / 0 STOP OPEN/CLOSE button to
close the tray.
6
Press the STANDBY ON button to turn off the
power.
TE
L 13942296513
How to open the tray when the power cannot be on
1
Remove the six screws.
2
Remove the bottom plate.
3 Insert a · screwdriver (small) into the slit, and
slide the drive cam in the direction of the arrow.
4
Pull the tray by a hand.
1
1
1
www
1
Bottom view
.
5
http://www.xiaoyu163.com
1
2 1
x ao
Bottom plate
y
i
http://www.xiaoyu163.com
6
8
2 6
4
3
Tray
5
Tray panel
Note:
Q Q
3 6 7 1 3
To remove the tray panel, disengage it from the hooks by slowly bending it
toward you in order not to damage the hooks, then pull it up.
Hook
· Screwdriver (small)
3
Drive cam
Bottom view
u163
.
DVD-V8000
6
7
2 9 9 4 2 8
3 5
1 5 0 5 8 2 9 9 4
Hook
Bottom view
· Screwdriver (small)
Slit
3
m
co
Tray 4
7
8
9 9
A
B
C
2 8 9 9
D
E
Bottom view
F
109
8