Main Specifications/Performance; Main Unit - Canon dp-v3010 Instruction Manual

Video display
Hide thumbs Also See for dp-v3010:
Table of Contents

Advertisement

Main specifications/Performance

Main Unit

Panel
Panel Type
Screen Size
Aspect Ratio
Resolution
Active Display Area
Pixel Pitch
Panel Driver
Image quality
Brightness (Standard)
View Angle (Up, Down, Left, Right)
Surface Treatment
General
Backlight Type
Power
Power consumption
Environmental
Operating
Conditions
Storage/
Transporting
Dimensions (width x height x depth)
Weight
Mounting Hole Pitch
Interface
Input
3G/HD-SDI
DisplayPort
Output
3G/HD-SDI
IPS LCD panel
30 inch (76.1 cm)
16:10
4096x2560 (10.5 megapixels)
Approximately 645.1 x 403.2 mm
157.5 μm
1024 gradations, 10-bit for each RGB color
2
48 cd/m
(DCI-P3), 100 cd/m
89° (contrast ratio 10 : 1 or higher)
Low-Reflection Glare
RGB LED, direct down type
Rated Voltage: 100 – 240 V AC
Rated Frequency: 50/60 Hz
At maximum load (including change in brightness through aging): Approximately 370 W
At factory shipment: Approximately 130 W
Temperature and humidity: 5 – 35 °C (41 – 95 °F), 20 – 80 %RH (no condensation)
recommended: 15 – 30 °C (59 – 86 °F)
Pressure: 700 – 1060 hPa
Temperature and humidity: - 20 – 40 ˚C (-4 – 104 °F), 10 – 85 %RH (no condensation)
41 – 60 ˚C (105 – 140 °F), 10 – 40 %RH (no condensation)
Pressure: 700 – 1060 hPa
Approximately 708 x 474 x 189 mm (27.9 x 18.7 x 7.4 in.)
Approximately 24 kg (52.8 lb)
VESA standard 200 x 200 mm (7.9 x 7.9 in.)
8 (2 systems)
BNC (75Ω) receptacle terminal
3G-SDI: SMPTE 2048-2/274M/296/372/425-1/428-19/428-9 compliant
HD-SDI: SMPTE 2048-2/274M/292-1/296/428-19/428-9 compliant
HD-SDI Dual: SMPTE 2048-2/274M/372/428-19/428-9 compliant
4 (1 system)
DisplayPort terminal
DisplayPort Standard Specification Ver.1.1a compliant
8 (2 pass-thru systems)
2
Main specifications/Performance
69

Advertisement

Table of Contents
loading

Table of Contents