Advertisement
DISASSEMBLY- AND RE-ASSEMBLY ADVICE
A. Top cover removal
1. Open the cover from the top cover by using a fl athead
screw driver to open the 6 click connections.
2. Use a crosshead screw driver to unscrew the 4 screws A.
Note: When you close the top cover, use a screw
torque off 50 till 80 Nm (5 to 8 kgf.cm)
A
A
HD9220/20 /21 /22 /23 /24
3. Use a fl athead screw driver to open the "timer top cover"
and pull the knob from the appliance.
4. Unscrew the screw
B
Note: Replace the timer cover and / or the cover in
Tip:
A
A
B
under the timer top cover.
case of damage and / or scratches.
Open the "timer cover" from the bottom side,
to avoid scratches on visible places.
5-10
Advertisement
