Manual Configuration; Dynamic (Cable) - D-Link DIR-615 User Manual

Section 3 - Configuration
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select
your Internet type and enter the correct configuration parameters.
Select your Internet connection type using the "My Internet
Connection is" drop-down menu.
Click the Save Settings button when you have configured the
connection.
My Internet
Select Dynamic IP (DHCP) to obtain IP Address information
Connection:
automatically from your ISP. Select this option if your ISP does not
give you any IP numbers to use. This option is commonly used for
cable modem services such as Comcast and Cox.
Enable
Advanced Domain Name System (DNS) services enhances your
Advanced
Internet performance by getting you the information and web pages
DNS Service:
you are looking for faster and more reliably. In addition, it improves
your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go
and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service
or its features.
Host Name:
The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure.
Use
Check the box if you are having problems obtaining an IP address from your ISP.
Unicasting:
Primary/
Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained
Secondary
automatically from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP.
DNS Server:
D-Link DIR-615 User Manual

Manual Configuration

Dynamic (Cable)

19