Charging Your Device; Attaching Your Integrated Microphone/Receiver Headset (Earpiece) - Motorola Operations Critical Wireless NNTN8127 Manual

CHARGING YOUR DEVICE

Prior to using the device for the first time, it should be fully
charged. Recommended charging time is three (3) hours.
Note: Ensure that the dust cap is fitted back on the USB port,
upon removing it from the charger.
Refer to Table 1 for charging status indicators:
Charging (when connected via USB
to PC or wall charger)
90% charged battery capacity
100% charged battery capacity
Table 1: Battery Charging LED Indicators
ATTACHING YOUR INTEGRATED
MICROPHONE/RECEIVER HEADSET
(EARPIECE)
The following steps describe how to attach/detach your
earpiece:
1. To attach and lock the earpiece, push the connector in and
turn the connector clockwise until the stop is reached.
2. To unlock and detach the earpiece, turn the connector
counterclockwise so that the "unlock" symbol aligns with the
recess on the front housing and pull the connector out.
Note:
•Please attach your earpiece prior to establishing the connection
with radio.
•If the earpiece is replaced or re-attached, the accessory must be
powered off and powered back on to ensure proper detection
and operation of the earpiece with the accessory.
•The wireless link is dropped upon accidental or intentional
removal of the earpiece from the device.
State LED Indication
Red LED illuminated
Green LED blinking
Green LED illuminated
5