Specifications - NEC HT1000 User Manual

SPECIFICATIONS

This section provides technical information about the HT1000 Projector's performance
Model Number
Optical
DMD™
Resolution
Lens
Lamp
Image Size
Projection Distance
Projection Angle
Electrical
Inputs
Outputs
Video Compatibility
Scan Rate
Video Bandwidth
Pixel Clock Freq
Color Reproduction
Horizontal Resolution
External Control
Sync Compatibility
Built-in Speakers
Power Requirement
Input Current
Power Consumption
Mechanical
Installation
Dimensions
Net Weight
Environmental Considerations
Operational Temperatures :
Storage Temperatures :
Regulations
For additional information visit:
US : http://www.necvisualsystems.com
Europe : http://www.nec-europe.com/
Global : http://www.nec-pj.com/
Digital Light Processing, DLP, Digital Micromirror Device and DMD are trademarks of Texas Instruments.
The specifications are subject to change without notice.
HT1000
Single Chip Digital Micromirror Device (DMD™)
1024 768 pixels up to 1080p (1920 1080) with Advanced AccuBlend
Manual zoom and focus:
F2.5 – 2.8 f = 22.4mm – 27.0mm
220 W DC standard
30" – 200" (0.8 m – 5.08 m) diagonal (4:3)
40" – 200" (1.0 m – 5.08 m) diagonal (16:9)
2.95ft – 24.93ft / 0.9m – 7.6m
18.6° – 19.4°(wide) / 15.7° – 16.2°(tele)
1 RGB, 1 S-Video, 1 Video, 1 Component, 1 DVI digital, 1 PC Card, 4 Stereo Mini Audio, 1 PC Control
1 SC.Trigger
NTSC, NTSC4.43, PAL, PAL-60, PAL-N, PAL-M, SECAM, Component: 1080p, 1080i, 720p, 576p, 480p, 576i, 480i
Horizontal: 15 kHz to 69 kHz (RGB: 24 kHz or over) / Vertical: 48 Hz to 88 Hz
RGB: 100 MHz (-3dB)
Less than 100 MHz
16.7 million colors simultaneously, Full color
NTSC / NTSC4.43/PAL / YCbCr: 540 TV lines
SECAM: 300 TV lines
RGB: 1024 dots (H) 768 dots (V),
RS232C, IR, LAN (wired)
Separate Sync / Composite Sync / Sync on G
2W 2 (stereo)
100 – 120V AC / 200 – 240V AC, 50 / 60 Hz
3.2A (100 – 120V AC) / 1.6A (200 – 240V AC)
290W (0.8W Standby)
Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
10.2" (W) 3.6" (H) 10.8" (D)
260mm (W) 92mm (H) 275mm (D)
(not including protrusions)
7.1 lbs / 3.2 kg
41°F to 95°F (5°C to 35°C), 20% to 80% humidity (non-condensing)
14°F to 122°F (–10°C to 50°C), 20% to 80% humidity (non-condensing)
UL Approved (UL 1950, CSA 950)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS3548 Class B
Meets EMC Directive (EN55022:1998, EN55024-1998, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950, TUV GS Approved)
E-52