Table of Contents
Advertisement
6-7 DMC Editing
6-7 DMC Editing
6-32 (E)
Chapter 6 Editing
Allows you to use slow motion and other variable speeds during playback and
editing. DMC stands for Dynamic Motion Control.
Notes
• Before executing AUTO EDIT, you must execute PREVIEW. After
PREVIEW if the edit point and channel have been corrected, PREVIEW
must be executed again.
• Playback in the shuttle mode cannot be conducted during DMC editing while
PREVIEW is in progress.
• Entry cannot be performed on the channel during AUTO EDIT.
• A peripheral device can be selected as the player, but material using
transition effects cannot be edited.
• In the Insert mode, INS (Insert) cannot be set.
• In PREVIEW, in addition to the conventional playback port (P1), the
recording port (R1) is also used as a recorder. Therefore, if the recorder is
selected during DMC editing while PREVIEW is in progress, the
RECORDER button, the P1 and R1 buttons (or the P2 and R2 buttons) light
up. Depending on the port selected in MAV-777 Expansion menu item 317
PANEL MODE RECORDER PORT, the recording device automatically
lights.
• You cannot execute PREVIEW when material is loaded to the R1 port or the
meter panel's Remote button is lit.
• You cannot select the same port for the player and recorder.
• You cannot perform abbreviated editing or on-the-fly editing.
1
PB EE
TRIM
L1
L2
IN
OUT
L3
AUDIO
L4
ENTRY
L5
L6
IN
OUT
L7
L8
L9
DMC EDIT
DELETE
L10
MEMORY
L11
PREVIEW
AUTO EDIT
REVIEW
MODE
SHIFT
B1
6
9
2, 4
1
Use the normal editing procedure to set the recorder IN point and player
IN point.
For details about how to set edit points, see Section 6-2-6, "Setting the Edit
Points" (page 6-8).
2
Press the DMC EDIT button to light the button.
3
Press the VAR button to light the button.
PB
HOLD
RESET
TC/UB
TIMER SEL
1
R1
EXT
R2/
2
P3
PLAYER
MULTI
CONTROL
REC
PREROLL
REW
PLAY
B2
B3
B4
B5
B6
B7
3
SHUTTLE
JOG
VAR
P1
PORT SELECT
P2
RECORDER
EDIT
F. FWD
STOP
4, 7
Advertisement
Table of Contents
