NEC NP03WI Instruction Manual page 12

• For M352WS/M302WS/M332XS:
Use the camera unit, adapter (24F5014 ☐ ), and two screws
Preparation:
• Prepare a plus-headed screwdriver.
1. Attach the camera unit to the adapter.
Engage the two protrusions of the camera unit in the holes of the adapter to align the screw
hole.
Tighten the screw to ensure safety.
2. Attach the adapter to the projector.
Engage the two protrusions of the adapter in the holes of the projector to align the screw
hole.
Tighten the screw to ensure the safety.
NOTE
• Do not allow the screws to be loosened. Doing so may cause the camera unit to fall, resulting
in personal injury.
• Do not hold the camera unit to lift the projector. Doing so may result in damage to the camera
unit, causing failure or malfunction.
ENG-12