Advertisement
3. Outing Function (Continued)
• Setting the Outing Function
1．Press and hold
temperature setting screen.
,
and the upper limit temperature start flashing.
(The default value of the upper limit temperature is 38 °C.)
2．Press
/
to select the upper limit temperature, and press
fix the value. The lower limit temperature setting screen is displayed.
3．Press
/
to select the lower limit temperature, and press
fix the value. The outing function setting is completed. (The default value of
the lower limit temperature is 10 °C.)
*The unit returns to the normal mode if
3 minutes during the setting. In this case, all the settings in progress will be lost.
• Canceling the outing function
Press and hold
for more than 4 seconds while the outing function is set.
• Outing function indication
Outing function
indication
Off
The outing function is not set.
Flashing
The outing function is now being set, or under operation.
Lighting
Although he outing function is set, not under operation.
Note
If a blackout occurs during outing function operation and power is cut, the remote controller will lose
the information for outing function opera ion. It reverts from the blackout, and an air conditioner does not
drive in outing func ion when operation is started. At this time, an air condi ioner does not stop at ou ing
function.
for more than 4 seconds to display the upper limit
is pressed or there is no operation made for
Status
EN-5
to
2
to
3
EN
Advertisement
