Connections - Pioneer DDJ-RZ Operating Instructions Manual

Connections

For information on using this product with rekordbox dj, refer to this
product's operating instructions published on the Pioneer DJ site.
1 Connect headphones to one of the [PHONES]
terminals.
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.
! To output the sound from the [BOOTH OUT] terminals, connect
speakers or other devices to the [BOOTH OUT] terminals.
! For details on connecting the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your computer via a USB cable.
USB cable
(included)
4 Turn on the computer's power.
5 Connect the power cord.
Powered speaker, etc.
To power outlet
Power cord
(included)
6 Press the [u] switch on this unit's rear panel to turn
this unit's power on.
Turn on the power of this unit.
! For Windows users
The message [Installing device driver software] may appear
when this unit is first connected to the computer or when it is
connected to a different USB port on the computer. Wait a while
until the message [Your devices are ready for use] appears.
7 Turn on the power of the devices connected to the
output terminals (powered speakers, power amplifier,
components, etc.).
! When a microphone, DJ player or other external device is con-
nected to input terminals, the power of that device also turns on.
11
En