Dtc P0335 Crankshaft Position Sensor Circuit Malfunction - Suzuki 2000 Grand Vitara SQ625 Service Manual

6-1-90 ENGINE (H25 ENGINE)

DTC P0335 CRANKSHAFT POSITION SENSOR CIRCUIT MALFUNCTION

WIRING DIAGRAM
TERMINAL ARRANGEMENT OF ECM (PCM) COUPLER (VIEWED FROM HARNESS SIDE)
DTC DETECTING CONDITION AND TROUBLE AREA
DTC DETECTING CONDITION
CKP sensor signal is not input for 3 sec. after engine start.
DTC CONFIRMATION PROCEDURE
NOTE:
Check to make sure that following conditions are satisfied when using this DTC CONFIRMATION PROCE-
DURE.
D Intake air temperature: between –14 C and 70 C (6.8 F and 158 F)
D Atmospheric pressure: higher than 560 mmHg (Altitude: lower than 2790 m (9150 ft))
D Following DTC is not detected: P0340 (No.42)
(1) With ignition switch OFF, connect scan tool.
(2) Turn ON ignition switch and clear DTC by using scan tool if any.
(3) Start engine and run it for 10 sec.
(4) Check DTC by using scan tool.
1. CKP sensor
TROUBLE AREA
CKP sensor
CKP sensor circuit
ECM (PCM)