D-Link ShareCenter DNS-320L User Manual page 26

Section 3 - Installation
Power and Device Selection
Step 8 - Connect the power adapter connector to the power
receptacle on the back of the ShareCenter. Then, power on the
ShareCenter by pressing the power button located in the front panel.
Click Next to continue.
Step 9 - With the power on, you can select the device from the list.
This will cause the power LED to blink and confirm your selection.
Note: Allow 1-2 minutes for the DNS-320L to be recognized.
Click Next to continue.
D-Link ShareCenter DNS-320L User Manual 20