Specific Safety Rules - Craftsman 315.SS630 Operator's Manual

 Use battery operated tool only with specifically
designated battery pack. Use of any other batteries
may create a risk of fire.
 Use battery only with charger listed.
BaTTERY paCK
MODEL
(Li-ion)
315.113740
(130285003,
130285006)
315.113710
(130156001)
BaTTERY paCK
(ni-Cd)
315.SS630
130279003,
130279005
(Item No.
 Disconnect battery pack from tool before making
any adjustments, changing accessories, or storing
the tool. Such preventive safety measures reduce the
risk of starting the tool accidentally.
 When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
sparks, burns, or a fire.
 Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing

SpECiFiC SaFETY RULES

ChaRGER
(Multi-Chemistry)
315.259260
(140351001)
CH2000
CH2010 (140136001)
315. 259260
(140351001)
1425301 ( 11041)
9
315.115730
(140301006)
315.115720
11375) (140301007)
9
CH2000
CH2010 (140136001)
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
 Do not place battery tools or their batteries near
fire or heat. This will reduce the risk of explosion and
possibly injury.
 Do not crush, drop or damage battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow. A damaged bat-
tery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
 Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery
can propel debris and chemicals. If exposed, flush with
water immediately.
 Do not charge battery tool in a damp or wet
location. Following this rule will reduce the risk of
electric shock.
 For best results, your battery tool should be charged
in a location where the temperature is more than
50°F but less than 100°F. Do not store outside or in
vehicles.
 Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in con-
tact with your skin, wash immediately with soap
and water. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Following this rule will
reduce the risk of serious personal injury.
 Never leave a tool unattended with the battery
installed.
 Save these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone
this tool, loan them these instructions also.
5 - English