Mounting The Unit Onto The Digital Camera, And Removing It - Panasonic DMW-FL500 Operating Instructions Manual

Mounting the Unit onto
the Digital Camera, and
Removing it
≥ Check that the power of the digital camera and
unit is off. (Mounting the unit onto, or
disengaging it from, the camera while the
power is on may cause trouble and is not
recommended.)
∫
Mounting the unit
1 Secure the flash head at the
horizontal front position.
A
A: Bounce unlock button
≥ If the flash head is at the lock position,
rotate it while pushing the bounce unlock
button.
2 Loosen the lock ring.
≥ If the lock pin is protruding, turn the lock
ring in the opposite direction from
[2LOCK] and retract the pin.
≥ Do not apply more force than is
necessary to the lock ring.
≥ Do not touch the terminal areas with your
fingers, metal objects, etc.
≥ Do not mount the unit onto the digital
camera while the lock pin is protruding.
Otherwise you may damage the unit.
12
VQT0Z62
3 Slide the unit firmly toward the
back of the hot shoe until a
clicking sound is heard.
4 Turn the lock ring in the
[2LOCK] direction until it stops
turning.
∫
Removing the unit
Completely loosen the lock ring,
and slide the unit off from the hot
shoe.