Operating Basics; Connecting The Power Cord; Turning On & Off The Dm2000; About The Display - Yamaha DM 2000 Owner's Manual

3 Operating Basics

Connecting the Power Cord

Warning: Turn off all equipment connected to the DM2000 before making any power connec-
tions.
Connect the socket-end of the supplied power cord to the AC IN
on the rear panel of the DM2000. Connect the plug-end to a suit-
able AC wall outlet, one that conforms to the power supply
requirements stated on the DM2000's rear panel.
Turning On & Off the DM2000
To prevent loud clicks and thumps in your speakers, turn on your
audio equipment in the following order (reverse this order when turn-
ing off)—sound sources, multitrack and master recorders, DM2000,
monitoring power amplifiers.
To turn on the DM2000, press the [POWER] switch.
1
The startup page appears for a while, and then the last selected display
page appears.
To turn off the DM2000, press the [POWER] switch again.
2

About the Display

All DM2000 mix parameters can be edited on the various display pages.
Page title
Page #
Page area
Current Scene: The number and title of the currently selected Scene memory are dis-
played here. See "Storing & Recalling Scenes with the SCENE MEMORY Buttons" on page
159 for more information. If the selected Scene is write-protected, a padlock icon appears.
See "Using the Scene Memory Page" on page 160 for more information.
MIDI indicator: This indicator appears when the DM2000 is receiving MIDI data via the
MIDI IN port, USB TO HOST port, or SERIAL TO HOST port.
EDIT indicator
MIDI indicator
Selected
Current Scene
DISPLAY
Page tabs
Operating Basics
Sampling rate
Selected channel
Channel name
Page tab scroll arrow
DM2000—Owner's Manual
35