Send Own Caller Id When Calling; Use Automatic Redial - Nokia 2285 User Manual

• SEND OWN CALLER ID WHEN CALLING

This feature allows you to block caller ID when you call someone (your number will not be
displayed on their caller ID). This feature may only be effective when calling a number equipped
with caller ID.
Note: This feature is available only when supported by the wireless network and may
not function if you are roaming.
Important:
each time you want to block the sending of your own number to the caller ID.
Store feature codes
Before you can use the Send own caller ID when calling feature, you must store the feature
codes for activating this feature. Once the code is stored in your phone, it is sent automatically
to the network when you select this option from your phone menu.
1 Press Menu 4-6-5 (Settings > Network services > Network feature setting).
The Feature code field appears after a few seconds.
2 Enter the feature code your service provider gave you (for example, *67 for activating Send
own caller ID when calling), and press OK.
3 Scroll to Send own caller ID when calling and press Select.
4 Select No to assign the activation code.
Place a call without sending your number
1 Press Menu 4-6-4 (Settings > Network services > Send own caller ID when calling).
2 Scroll to No, and press Select.
3 Enter the desired phone number, and press OK.
OR
Press Search to recall a phone number from the phone book.
The phone automatically inserts the feature code into the dialing string and dials the phone
number. The person you are calling cannot see your phone number on their caller ID.

• USE AUTOMATIC REDIAL

There are times when you may not be able to place a call (for example, during to high—traffic
volume on the wireless network). When the wireless network is busy or unavailable, Automatic
redial instructs your phone to retry the call.
ACTIVATE AUTOMATIC REDIAL
1 Press Menu 4-1-2 (Settings > Call settings > Automatic redial).
2 Scroll to On and press Select.
If the system is busy, your phone makes three additional call attempts. If you want to stop the
automatic redial process before the last attempt, press the End key.
Important:
are calling is busy.
This feature works on a call-by-call basis. You must enable this feature
This feature does not automatically retry a number when the number you
[ 46 ]