Activate A Voice Command - Nokia 3155i User Manual

S e t t i n g s
■ Voice navigation
Before using voice tags, note the following:
• Voice tags are not language-dependent, but depend on the speaker's voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during an
emergency, so you should not rely on voice dialing in all circumstances.
Hands-free operation
You can set as many as 16 voice commands to enable hands-free operation of
certain features in your device.
Assign a voice tag to a command
Before using voice commands, you must first add a voice tag to the device function.
1. In the standby mode, select
2. Select the device function you want to tag: Profiles,
Voice memo, or
3. If necessary, select an option associated with that function and Add.
4. Select Start, and speak the voice tag clearly into the microphone. Do not
select Quit unless you want to cancel the recording.
The device replays and saves the recorded tag.
with voice tags assigned.

Activate a voice command

To issue a command after you have associated a voice tag with a function in your
device, speak the voice tag.
1. In the standby mode, press and hold the right selection key or voice key.
2. With Speak now
With the voice tag found, the device displays Found:, and plays the recognized
voice tag through the earpiece. The function you requested is activated.
52
Menu >
Call History.
displayed, pronounce the voice tag clearly into the microphone.
Settings > Voice navigation.
Voice
appears next to commands
mailbox, Radio,