Getting Started; Connection Diagrams - Sharp TU-R160HA Operation Manual

GETTING STARTED

Before connecting, ensure that the power cord of the unit is unplugged from the AC outlet and turn off
the devices to be connected. After making all connections (Diagrams on page 8), turn on the unit first
and then the other devices.
"NOTE" - When the unit is first powered up, please wait for a short while as the unit's software needs
to be initialised and the harddisk is checked.
The unit is equipped with output terminals that support RGB, S-video and CVBS video signals.The
image quality is highest in the order of the RGB signal, the S-video signal and the CVBS video signal

CONNECTION DIAGRAMS

TV Aerial TV Aerial
LOOP THROUGH
ANTENNA 2 ANTENNA 2 ANTENNA 1
OUT IN OUT
OPTIONAL
CABLE
AC3 DIGITAL
AMPLIFIER
NOTE: This set top box supports Free To View only. There is no provision for a CAM or Pay To View
card.
"Optional RF lead if you
still wish to watch analogue
channels on the TV"
DO NOT REMOVE
OPTICAL OUT
RS 232
ANTENNA 1
IN
VCR VCR
8
VCR SCART TV SCART
VCR SCART VCR SCART
OPTIONAL
CABLE
SCART CABLE
SUPPLIED
LEFT
AC IN
RIGHT CVBS
OPTIONAL
CABLE
Aux Aux
HI-FI
HI-FI