Panasonic DMW-FL360 Operating Instructions Manual page 26

o
+0.3 +0.7· · · +3.0
o
-0.3 -0.7· .. -3.0
• If [MANUAL] or[FP MANUAL]
is selected, the flash intensity
can be adjusted over a range
of +0.7 steps.
-0.7
+0.7
-0.3
+0.3
o
o
• You cannot adjust the flash
intensity when the guide number
is at the highest or lowest value.
The flash intensity adjustment
range and the actual flash
intensity may differ depending
on the flash mode.
• Flash intensity adjustment range
• If [TTL AUTO], [AUTO] or [FP
TTL AUTO] is selected, the
flash intensity can be
adjusted over a range of ±3.0
steps.
®
@: Flash intensity adjustment
value
• The flash intensity adjustment
value is always displayed except
when it is [0].
• The flash working range
displayed is for when the flash
intensity adjustment value is [0].
II
Adjusting the flash intensity
The flash intensity can be adjusted
in steps.
Set the flash intensity adjustment
to [ON] before adjusting the flash
intensity. (P40)
• [I~'Z.I] appears on the display
panel.
1 Turn the select dial and
set the flash intensity
adjustment value.
26
VQT1810