Advertisement
[Original] Refers to the original language in which the disc was recorded. [Other] Press ENTER ( ) to select another language. Use number buttons then
press ENTER ( ) to enter the corresponding 4-digit number according to the language code list on page 82. [Off ] (Disc Subtitle only) Turn off Subtitle.
[AUDIO] Menu Each disc has a variety of audio output options. Set the player's Audio options according to the type of audio system you use.
3 Installation NOTE Since many factors affect the type of audio output, see "Audio Output Specifications" on pages 86-87 for details. Digital Output NOTE
Depending on the disc, your language setting may not work. Select the output sound format when a device equipped with a HDMI or Digital Audio input jack
is connected to the HDMI OUT or DIGITAL AUDIO OUT jack on this unit. [PCM Stereo] Select if you connect this unit's HDMI OUT or DIGITAL AUDIO
OUT jack to a device with two-channel digital stereo decoder. [PCM Multi-Ch] (HDMI only) Select if you connect this unit's HDMI OUT jack to a device
with multi-channel digital decoder. [Re-Encode] Select if you connect this unit's HDMI OUT or DIGITAL AUDIO OUT jack to a device with DTS decoder.
DTV Audio Digital channels sometimes provide multiple audio tracks, often in a different language. You can set a default audio language with this setting. If
provided by the broadcaster, you can also select a different audio language while viewing TV by pressing AUDIO repeatedly. (See "Selecting DTV audio
) 36 Installation [Primary Pass-Thru] Select if you connect this unit's DIGITAL AUDIO OUT and HDMI OUT jack to a device with LPCM, Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder. DRC (Dynamic Range Control) When a content encoded in Dolby Digital or Dolby Digital
Plus is playing back, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). This
allows you to listen to a movie at a lower volume without losing clarity of sound. Set [DRC] to [On] for this effect. NOTE · When [HDMI] option is set to
[PCM Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID.
NOTE The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode. 3 Installation · If the [Digital Output] option is
set to [Reencode], the Re-encode audio is outputted for BD-ROM discs with secondary audio and the original audio is outputted for the other discs (like
[Primary Pass-Thru]). Sampling Freq. [192KHz] Select this if your A/V Receiver or Amplifier is capable of handling 192 KHz signals. [96KHz] Select this if
When this choice is made, this unit automatically converts any 192 KHz signals to 96 KHz so your system can decode them. [48KHz] Select this if your A/V
Receiver or Amplifier is NOT capable of handling 192 KHz and 96 KHz signal. When this choice is made, this unit automatically converts any 192 KHz and
96 KHz signals to 48 KHz so your system can decode them. Check the documentation for your A/V Receiver or Amplifier to verify its capabilities. Installation
37 [LOCK] Menu The [LOCK] settings affect only BD and DVD playback. To access the any features in [LOCK] settings, you must enter the 4-digit security
code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER ( ) to create a
new password. DVD Rating Blocks playback of rated DVD based on their content. (Not all discs are rated.
) [Rating 1-8] Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] If you select unlock, parental control is not active
and the disc plays in full. BD Rating Password You can create or change the password. [New] Enter a 4-digit password twice, and press ENTER ( ) to create
a new password. [Change] Enter the current password and press ENTER ( ). Enter a 4-digit password twice, and press ENTER ( ) to create a new password.
If you forget your password If you forget your password, you can clear it using the following steps: 1. Remove any disc that might be in the player. 2. Select
3. Use Number buttons to enter "210499". The password is cleared. Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM
[255] All BD-ROM can be played. [0-254] Prohibits play of BD-ROM with corresponding ratings recorded on them. 3 Installation Area Code Enter the code
of the area whose standards were used to rate the DVD video disc, based on the list on page 81. DTV Lock System Allows you to set up specific programs and
ratings through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up.
A password is required to gain access to the lock menu options. When the DTV Lock System is set to [OFF], the [DTV Rating] is not effective. (See "Setting
the DTV Lock System" on page 31.) NOTE If you make a mistake before pressing ENTER ( ), press CLEAR. Then input the correct password. DTV Rating You
can set the rating to block out all the programs with rating above a specified level. (See "Adjusting DTV Rating level" on pages 31.) 38 Installation
[NETWORK] Menu The [NETWORK] settings are needed to use the software update, BD Live and My Media. [DTV] Menu Region Select a region where you
Connection Setting If your home network environment is ready to connect the unit, the unit needs to be set the wired or wireless network connection for
network communication. (See "Connecting to your Home Network" on pages 20-25.) Auto Programming This option scans a programme and sets the
available programmes. Refer to page 29-30 for more information. 3 Installation Connection Status If you want to check the network status on this unit, select
the [Connection Status] options and press ENTER ( ) to check whether a connection to the network and the internet have been established. Program Edit This
option allows you to edit the TV or Radio programmes. Refer to page 30 for more information. Time The clock must be set in order to use timer recording.
[Auto] Set the programme that boadcasts a clock signal and the clock will be set automatically. If the time that has been automatically set is not correct when
Select an option relative to GTM in the [Time Zone]. [Manual] If there is no channel that broadcasts a clock signal in your area, you can set the time and
date manyally. Use I/i to select each field, and input correct time and date using U/u, and press ENTER ( ). BD-LIVE connection You can restrict Internet
language" on page 43.
your A/V Receiver or Amplifier is NOT capable of handling 192 KHz signals.
[Password] option in the [Setup] menu.
operate this recorder. Refer to page 29 for more information.
compared your local time, you can set additional time option.
access when BD-LIVE functions are used.
You're reading an excerpt. Click here to read official LG HR500 user
guide
http://yourpdfguides.com/dref/3907575
viewing.
Advertisement
