Packet Data Connection; Packet Data Settings - Nokia 6280 User Manual

The applications that may use WCDMA or (E)GPRS are MMS, video
streaming, browsing sessions, e-mail, remote SyncML, Java application
downloading, and the PC dial-up.
When you have selected GPRS as a data bearer, the phone uses EGPRS
instead of GPRS if this is available in the network. You cannot select
between EGPRS and GPRS, but for some applications you may be able to
select GPRS or GSM data

Packet data connection

Select Menu > Settings
connection, and from the following options:
Always online to set the phone to automatically register to a packet
data network when you switch on the phone.
the packet data service is available.
If you receive a call or a text message, or make a call during a packet
data connection,
suspended (on hold).
When needed to register and establish a packet data connection when
an application using packet data needs it, and to close the connection
when you end the application.

Packet data settings

You can connect the phone using Bluetooth wireless technology,
infrared, or USB data cable connection to a compatible PC and use the
phone as a modem to enable packet data connectivity from the PC.
To define the settings for the packet data connections from your PC,
select Menu > Settings
settings > Active access
use. Select Edit active access point
to change the access point settings, and select OK. Select
access point, enter the access point name (APN) to establish a
connection to a network, and select OK.
You can also set the packet data service settings (access point name) on
your PC using the Nokia Modem Options software. See "Nokia PC Suite,"
(circuit switched data, CSD).
> Connectivity
or indicates that the packet data connection is
> Connectivity
point, and activate the access point you want to
> Alias for access
> Packet data > Packet data
or indicates that
> Packet data > Packet data
point, enter a name
S e t t i n g s
Packet data
67