Advanced Wireless 2.4Ghz - D-Link AC750 User Manual

Section 3 - Configuration
This section allows you to change the behavior of the 2.4GHz wireless radio from the standard settings. Please be aware that any changes to the
factory default settings may adversely affect the behavior of your network.
Transmit Power: Set the transmit power of the antennas.
Wireless Mode: Select one of the following:
Mixed 802.11g and 802.11b - Select if you are using both 802.11b
and 802.11g wireless clients.
802.11n Only - Select only if all of your wireless clients are 802.11n.
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using
a mix of 802.11n, 11g, and 11b wireless clients.
Band Width: Select the Band Width:
Auto 20/40 (Auto) - Select if you are using both 802.11n and non-
802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
This is the default setting.
20/40MHz
Enable this option to reduce interference from other wireless
Coexist:
networks in your area. If the channel width is operating at 40MHz
and there is another wireless network's channel over-lapping
and causing interference, the router will automatically change to
20MHz.
D-Link DIR-813 User Manual

Advanced Wireless 2.4GHz

33