Setting Up The Sound Output Of The Connected Component - Sony RHT-G900 Operating Instructions Manual

Note
• The INPUT OPT jack has priority when you connect
both the audio output of the TV to the INPUT OPT
and INPUT ANALOG jack of the stand.
If you connect any of the
components with HDMI jacks,
and the Control for HDMI function
is set to on
Set "CTRL: HDMI" to "OFF" in the AMP menu
of the stand for the component connected to the
stand using the INPUT OPT or INPUT COAX
jack (except a TV) individually. For details, refer
to "Setting the Control for HDMI function to off
for a component without HDMI jacks"
(page 29).
14
GB
Downloaded From TheatreSystem-Manual.com Manuals
Setting up the sound
output of the connected
component
Depending on the audio output settings of the
connected component, the sound may output in 2
channel sound format only. In this case, set the
connected component to output the sound in
multi channel sound format (PCM, DTS, Dolby
Digital). For details on audio output settings,
refer to the operating instructions supplied with
the connected component.