Part Names; Charging; Turning The Power On/Off - Panasonic RP-BTS30 Owner's Manual

Part names

5 6 7
Right earphone
10
Remote controller
The product illustrations may differ from
the actual product.
Right earphone
1
1
USB lid
2
2
Earpiece
3
Left earphone
4
Cord adjuster
5
3
Clip
6
Remote controller
7
4
LED indicator light*
8
• The number of blinks or color
notifies the status of the unit.
(* hereafter referred to as "LED")
Charging terminal (DC IN)
9
• Open the USB lid and connect
the USB charging cord
(supplied) to this terminal when
charging. (See "Charging")
Microphone
10
Volume +/Next
11
Power/Pairing/Play/Pause/
12
8 Call
Volume –/Previous
13
9
2
■
Note
• Excessive sound pressure from
earphones and headphones can
cause hearing loss.
• Listening at full volume for long
periods may damage the user's
ears.
11
• Do not use any other USB
12
charging cords except the
supplied one.
13
• When using the unit, do not cover
the right housing with the palm
of your hand. The Bluetooth
®
connection may be blocked.

Charging

The rechargeable battery (installed in the unit) is not charged initially. Charge
the battery before using the unit.
1
Connect this unit to a computer
using the USB charging cord
• Within approximately 3 seconds after
the connection is established, the LED
on the right earphone will light in red.
• The LED lights in red when charging
is in progress. When charging is
completed, the LED will go out.
• Charging will take approximately
1.5 hours from empty state to fully
charged. (Quick charging time for
70 minutes operation: Approx. 15 minutes)
■
Note
• The Bluetooth feature cannot be used when this unit is connected to a computer
®
using the USB charging cord.
• Charge in a room temperature between 10 °C and 35 °C (50 ºF and 95 ºF).
Outside of this range of temperatures, charging may stop.
• The power cannot be turned on while charging.
• If PC used for charging enters "sleep mode", charging may not take place.
• Do not use any other USB charging cords except the supplied one.
Caution: Use only the supplied USB charging cord when connecting to a
computer.

Turning the power on/off

1
Press and hold for approximately
3 seconds
• A beep will sound and the LED on the right
earphone will blink.
To turn the power off
• Press and hold for approximately 3 seconds.
A beep will sound and the power will be turned off.
■
Note
• When the unit is not operated for approximately 5 minutes, the power will
automatically turn off. (See "Auto power off" (→ P. 6))
Right earphone
LED
Computer
USB charging cord (supplied)
LED
Power
3