Starting Procedure (For Camera); Setting The Video Signal; Mixtrax - Pioneer AVIC-8200NEX Operating Manual

AV input
6 Touch [AV].

Starting procedure (for camera)

You can display the image output by the camera connected to
video input.
 Refer to the Installation Manual.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Touch [AV Input].
4 Touch [Camera].
5 Display the AV source selection screen.
6 Touch [Camera View].
p When the camera view of both the rear view camera and 2nd
camera are available, the key to switch the display appears.
Touch this key to switch the display between the rear view
image and 2nd camera image.

Setting the video signal

When you connect this product to an AV equipment, select the
suitable video signal setting.
The default setting is "Auto".
p You can operate this function only for the video signal input
into the AV input.
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
60
3 Touch [AV].
4 Touch the item.
The following items are available:
Auto, PAL, NTSC, PAL-M, PAL-N, SECAM.

MIXTRAX

Exits the MIXTRAX screen.
Displays the LinkGate screen.
Touch the desired item. Songs
related to the selected item are
played.
Selects a track.
Turns on or off the MIXTRAX
original visual display.
Switches between playback and
pause.
Displays the item selected on the
LinkGate screen or item selection
screen.