Related Manuals for Nokia 20
Summary of Contents for Nokia 20
- Page 1 Electronic user’s guide released subject to "Nokia User’s Guides Terms and Conditions, 7th June, 1998" Nokia 20 GSM Connectivity Terminal User’s Guide for modem use 9353276 Issue 1...
- Page 2 DECLARATION OF CONFORMITY We, NOKIA MOBILE PHONES Ltd declare under our sole responsibility that the product TME-2 is in conformity with the provisions of the following Council Directive: 1999/5/EC. Copyright © Nokia Mobile Phones Ltd 2001. All rights reserved. Reproduction, transfer, distribution or storage of part or all of the contents in this document in any form without the prior written permission of Nokia is prohibited.
-
Page 3: Table Of Contents
Getting started ...9 Setting up the terminal ...9 AT commands ... 15 Light indicators ...16 Nokia 20 GSM Connectivity Terminal accessories ...18 Troubleshooting ...19 Care and maintenance ...21 Important safety information ...22 Technical specifications ...24 ©2001 Nokia Mobile Phones. All rights reserved. -
Page 4: For Your Safety
MAKE BACKUP COPIES Remember to make backup copies of all important data. CONNECTING TO OTHER DEVICES When connecting to any other device, read its user’s guide for detailed safety instructions. Do not connect incompatible products. ©2001 Nokia Mobile Phones. All rights reserved. -
Page 5: Introduction
Congratulations on your purchase of the Nokia 20 GSM Connectivity Terminal. It plugs into compatible PCs or other devices with an RS-232 data cable. Using the Nokia 20 GSM Connectivity Terminal and appropriate software, you can send and receive e-mail, data files, faxes, and access the Internet from your PC. - Page 6 Sales package contents: • GSM terminal • cradle • power supply with 2 cords • data cable • CD-ROM • installation kit (screws) ©2001 Nokia Mobile Phones. All rights reserved.
-
Page 7: System Requirements
• AT Hayes command support Network services The Nokia 20 GSM Connectivity Terminal is approved for use in the GSM 900 and GSM 1800 networks and in the GSM 900/1800 dual band network. The Nokia 20 GSM Connectivity Terminal supports High Speed Circuit Switched Data (HSCSD), which enables data transmission rates of up to 43.2 kbps. -
Page 8: Communications Software
To connect to the Internet, to send and receive e-mail or faxes, or to transmit data from your PC, you need the appropriate data and fax communications software. You can use the Nokia 20 GSM Connectivity Terminal with most commercially available communications applications, such as Microsoft Exchange, Microsoft Outlook and Netscape Navigator. -
Page 9: Getting Started
3. Getting started Setting up the terminal To use the Nokia 20 GSM Connectivity Terminal for the first time, proceed as follows: Install the SIM card. Mount the terminal on the cradle. Place the terminal in a proper location. Connect the data cable to the terminal and to a PC or other compatible device. Connect the power supply to the terminal and to an AC wall outlet. -
Page 10: Mounting The Terminal
Turn the antenna into an upright position. Note: If you want to mount the terminal on a wall, first attach the cradle to the wall as described below before mounting the terminal on the cradle. ©2001 Nokia Mobile Phones. All rights reserved. - Page 11 Caution: In order to comply with RF exposure requirements, install the terminal so that a minimum distance of 20 cm can be maintained between the antenna and all persons. If you use an external antenna, install the antenna so that a minimum distance of 20 cm can be maintained between the antenna and all persons, with antenna gain not exceeding 3 dBi.
- Page 12 Connecting the cables Connect the data cable from the terminal to a PC or other compatible device. Use only a cable supplied by Nokia. Connect the power cord from the power supply to the terminal. Connect the power supply to an AC wall outlet.
- Page 13 PIN code and NEWPIN the new code. Press ENTER. See ”Figure 2. HyperTerminal connection” for details. where PIN is your PIN code. Press ENTER. See ”Figure at+cpin="PIN" at+cpwd="sc","OLDPIN","NEWPIN" ©2001 Nokia Mobile Phones. All rights reserved. where OLDPIN is the...
- Page 14 Figure 1. Port settings ©2001 Nokia Mobile Phones. All rights reserved.
-
Page 15: At Commands
Other AT commands, which are used to control the terminal, can be found in the List of AT Commands on the CD-ROM. The Nokia 20 GSM Connectivity Terminal supports ITU-T V.25ter, ETS GSM 07.05 and ETS GSM 07.07 commands. ©2001 Nokia Mobile Phones. All rights reserved. -
Page 16: Light Indicators
4. Light indicators • Light indicators 1 and 2 are not in use. • Light indicators 3, 4 and 5 indicate the state of the terminal. Refer to Table 1. Table 1. Nokia 20 light indicators Blinking Blinking Blinking Blinking... - Page 17 Blinking Blinking Blinking Blinking Blinking Blinking Description The terminal has no space for new SMS messages. The oldest message is automatically deleted. Install the SIM card. An error has occurred. Contact service personnel. ©2001 Nokia Mobile Phones. All rights reserved.
-
Page 18: Nokia 20 Gsm Connectivity Terminal Accessories
5. Nokia 20 GSM Connectivity Terminal accessories For details and availability of Nokia 20 GSM Connectivity Terminal accessories, contact your local dealer. • Power supply (ACW-3): Supplied with the terminal. • Data package: Features an RS-232 data cable and an AT command list CD-ROM. -
Page 19: Troubleshooting
-113 dBm or less, poor coverage -111 dBm, medium coverage 2...30 -109... -53 dBm at 2 dBm intervals, good coverage -51 dBm or greater, excellent coverage not known or not detectable The parameters for <rssi> are: ©2001 Nokia Mobile Phones. All rights reserved. - Page 20 +cpin: SIM PUK. where PUK is your PUK code and at+cpin="PUK","PIN" in the HyperTerminal connection window, first ©2001 Nokia Mobile Phones. All rights reserved. and press ENTER. If at+cpin?
-
Page 21: Care And Maintenance
7. Care and maintenance • Your Nokia 20 GSM Connectivity Terminal is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and to enjoy this product for many years. When using your terminal OR any accessory: •... -
Page 22: Important Safety Information
The Nokia 20 GSM Connectivity Terminal is switched on when the power supply is connected to the terminal and to an AC outlet. Do not connect the power supply whenever it is forbidden to use a wireless phone, or when it may cause interference or danger. -
Page 23: Electronic Devices
These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers: • Should always keep the terminal more than 20 cm (6 inches) from their pacemaker when the terminal is switched on. • If you have any reason to suspect that interference is taking place, stop using your terminal immediately. -
Page 24: Technical Specifications
Cable length Environmental specifications Operating conditions Storage conditions Relative humidity range for operation 20...75% non-condensing and for storage 5...95% non-condensing. The terminal is not protected against ingress of water or liquids of any type. External antenna requirements Operating frequency range... - Page 25 Electro-magnetic compatibility (Europe) The terminal is tested for electro-magnetic compatibility (EMC) according to the ETS 300 342-1/ 13/standards. ©2001 Nokia Mobile Phones. All rights reserved.