Calling with the Outgoing Call Log
You can redial using the outgoing call log.
To call
T7600
While on-hook
Press Left .
Press ENTER .
To call with the REDIAL button (KX-TDA30 only)
Display PT
While on-hook
REDIAL
Press REDIAL to
display the outgoing
call log.*
•
* System programming is required for this operation. Consult your dealer.
•
This operation is available only for digital proprietary telephones with a display.
To store the caller's information in personal speed dialling
Display PT
When the desired party is displayed
AUTO DIAL
STORE
Press STORE .
•
You can lock your call log by using an extension PIN (Personal Identification Number), so
that you can prohibit access to your logged information. Refer to "3.1.2 Settings on the
Programming Mode".
•
If a call arrives while you are using the call log, the call log display will be replaced with the
caller's information.
Press Up or Down
until desired number
appears.
REDIAL
Press REDIAL
until desired number
appears.
1.11 Using a Display Proprietary Telephone
Off-hook.
Off-hook.
User Manual
121