Pioneer SVM-1000 Service Manual page 37

5
Page6 : METER TEST
Mode to check the LED segments of the meters by turning them on one by one
Page7 : TOUCH PANEL TEST
Mode to indicate the coordinates on the touch panels being touched
5
6
Each time you press the CUE key, the LED segments of the meters for
each channel light one by one.
All segments are dark at the beginning. When you press the key again
after your 15th press of the key (when the top LED is lit), all segments
will go dark again, permitting the test to be repeated from the beginning.
CH1 CUE
CH2 CUE
CH3 CUE
CH4 CUE
MASTER CUE
EFFECT CUE
CUE
Check the responses of the touch panels.
Press the touch-panel check buttons. Proper responses of the buttons
mean that the touch panels function properly.
If there is any misalignment, activate Service mode to re-calibrate the
panels.
While you are touching the lower (bottom) touch panel,
the corresponding coordinates on the panel are displayed.
Touch-panel check buttons
When you touch them correctly, the color of each touched
button changes between blue and red.
While you are touching the upper (top) touch panel,
the corresponding coordinates on the panel are displayed.
SVM-1000
6
7
: CH1 level meter
: CH2 level meter
: CH3 level meter
: CH4 level meter
: MASTR L CH level meter
: MASTR R CH level meter
CH1 CH2 EFFECT CH3
CUE CUE CUE
7
8
A
B
C
CH4 MASTER
CUE CUE
D
E
F
37
8