Table of Contents
Advertisement
1.
Turn the system board upside down.
2.
Release the zero insertion force (ZIF) connector (1) to which the rear-facing webcam is
attached, and then disconnect the rear-facing webcam from the system board.
3.
Remove the rear-facing webcam (2) and cable.
Reverse this procedure to install the rear-facing webcam.
Front-facing webcam
Description
0.3-MP front-facing webcam (includes cable)
Before removing the front-facing webcam, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
5.
Disconnect the battery cables from the system board (see
Remove the front-facing webcam:
1.
Release the ZIF connector (1) to which the front-facing webcam cable is attached, and then
disconnect the front-facing webcam cable from the system board.
Back cover on page
11).
Spare part number
785193-001
Battery on page
13).
Front-facing webcam
17
Advertisement
Table of Contents
