Save, Retrieve And Delete Measuring Data; Maintenance; Storing In The Bag - AEG BMG 4907 Instruction Manual & Guarantee

AEG_BMG_4907_Bed_An_80x110.qxd 01.03.2005 12:18 Uhr Se
GB
B. Save, retrieve and delete measuring data
a. Save data
After each measurement of the blood pressure, the data of the systolic/dia-
stolic pressures and heart rate of the respective measuring cycle are auto-
matically saved. The last 90 measuring results can be retrieved from the
device's memory. If the number of measuring cycles exceeds 90, the oldest
data in the memory are automatically deleted.
b. Retrieve data
(1) Only after a measuring cycle, you can use the – or + buttons to retrieve
measuring data saved at an earlier date (if there are any) using the
MEMORY button (3). When retrieving data, the display will first show the
number (NO.) of the measurement, and after about 3 seconds the measu-
ring data. The most recent measurement is measurement NO. 1.
(2) To select the next line of saved measuring data repeatedly push the
MEMORY button. The retrieved measuring data shown on the display are
numbered accordingly. After reading the stored measuring data push the
START button to switch off the device.
c. Delete data
(1) To delete data (only after a measuring cycle) hold the MEMORY button
pushed down. The display will show '---'.
(2) To verify whether the data has been deleted push the MEMORY buttons
after a measuring cycle. The display will only show the result of the most
current measurement.

Maintenance

• To clean the housing of the device use a cloth moistened with water or a
soft cleaning agent, then rub dry with a dry cloth. Use a dry cloth to
clean the cuff if it should be dirty.
• Do not immerse the device in water.
• Do not use gas or strong cleaning agents.
• If the measuring device is not used for a longer time, the batteries should
be removed. (Leaking batteries may damage the device.)

Storing in the bag

• Always store the cuff in the provided bag after use.
• Protect the measuring device with its accessories from direct sunlight,
high temperatures, humidity and dust.
• Do not expose the device to extremely low (below –20 °C (-4.0 °F)) or
high (above 65°C (122.0 °F)) temperatures.
54