Wireless Setup - D-Link dcs-5000l User Manual

Section 3 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Enable Check this box to allow your camera to connect to your
Wireless: network wirelessly.
SSID: Enter the network name (SSID) of the wireless network you
want to connect to. You can also click the Site Survey button
below to choose an available network and fill in settings
automatically.
If you are using Ad-Hoc as your connection mode, select the
Channel:
same channel that is being used by your wireless network.
Connection Select the connection mode used by your wireless network.
In most cases, you should select Infrastructure. Ad-Hoc is
Mode:
only used if your camera is directly connecting to another
PC or device without the use of a router or access point.
Site Survey: Clicking this button will allow you to select an available
wireless network to connect to, and will fill in the necessary
settings for you.
Wireless Select the wireless security mode used by your wireless
Security network. If you select WEP or WPA-PSK/WPA2-PSK, enter
Mode: the password for your wireless network in the text box that
appears.
D-Link DCS-5000L User Manual

Wireless Setup

34 34