2.
Pass the wires through the hole in the base cover, and attach the base cover to a wall using 2 screws.
Screw
Note
Two kinds of screws are included with a KX-T30865. Please choose the appropriate kind for your wall
type.
3.
Connect the wires to the screws located in the back cover.
4.
Re-attach the 2 halves and re-insert the screw.
Document Version 2010-08
3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays
: when a doorphone plate has been fixed to the wall
: when you wish to install the doorphone directly onto the wall
To 8-pin terminal block
To 8-pin terminal block
Installation Manual
131