Making Final Connections - Motorola HMN4098 Manual

Hang-up Cup
Hand Screw
(each side)
Bracket
Base
Adjusting Angle
0° to 110°
Figure 1. Adjustable Angle Bracket

Making Final Connections

When the adjustable angle bracket and hang-up cup are
installed, secured, and adjusted:
1. Snap the handset into the hang-up cup.
2. Connect the handset's coiled cord plug to the
microphone connector on the front of the terminal's
Control Head and the receive audio is routed to the
terminal. Align the connector's pin.
3. Turn the locking collar on the radio end of the handset
cord ¼ turn clockwise to secure it in place.
Internal Star
Lockwasher (4)
4
M4 x 10 mm LG
Torx-head Machine
Screw. A T-20 driver
is needed to locate
4mm Lock Nut (4)
#10-16 Hex-Head
Cap Screw