Page 1
LCD TV LA15S51BP Contact SAMSUNG WORLD-WIDE LA20S51BP If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. LS17M24CP Country Customer Care Center Web Site 1300 362 603 AUSTRALIA www.samsung.com/au CHINA 800-810-5858, 010- 6475 1880 www.samsung.com.cn...
Page 2
Pencegahan Saat Menampilkan Gambar Diam Gambar diam dapat menyebabkan kerusakan permanen pada layar TV. Jangan menampilkan gambar diam pada panel LCD lebih dari 2 jam karena dapat menyebabkan penyimpanan gambar layar. • Penyimpanan gambar ini juga dikenal sebagai "layar terbakar". Untuk menghindari penyimpanan gambar tersebut, kurangi tingkat kecerahan dan kontras pada layar apabila menampilkan gambar diam.
Contents CONNECTING AND PREPARING YOUR TV SETTING THE OTHERS List of Parts .............. 2 Choosing Your Language ........15 How to Adjust the Stand .......... 2 Setting the Blue Screen Mode......16 How to Adjust the Angle of the TV ...... 3 Selecting the Source ..........16 Installing the Wall Mount Kit ........
List of Parts Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. 17” 15”, 20” Remote Control Power Cord Wall Mount kit Owner’s Instructions & Batteries (AAA x 2) Warranty card Service Network Card Safety Guide...
Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Viewing the Control Panel LA15S51BP LA20S51BP LS17M24CP The product colour and shape may vary depending on the model. POWER SOURCE Toggles between all the available input sources Press to turn the TV on and off. (TV - AV - S-Video - Component - PC).
Viewing the Connection Panel Power Input The product colour and shape may vary depending on the model. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network...
Viewing the Remote Control Teletext Functions Television Standby button Teletext hold Number buttons for direct channel access Exit from the teletext display One/Two-digit channel selection Teletext index : Volume increase Teletext sub page : Volume decrease Teletext display/mix both teletext Temporary sound switch-off information and the normal broadcast Selects the TV mode directly...
Switching On and Off The mains lead is attached to the rear of your set. Plug the mains lead into an appropriate socket. The standby indicator lights up on the lower-right panel or right side of the panel. Press the POWER button on the lower-right panel.
The “Auto Store” menu is displayed with the “Start” selected. Press the ENTER button. The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. ENTER Press the button at any time to interrupt the memorization process. Press the ENTER button.
Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.
Editing the Channels You can exclude the channels you chose from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. Press the MENU button to display the menu. Press the button to select “Channel”, then press the ENTER button.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the button to select “Picture”, then press the ENTER button. 2. Press the ENTER button to select “Mode”.
Changing the Colour Tone You can select the most comfortable colour tone to your eyes. Press the MENU button to display the menu. Press the button to select “Picture”, then press the ENTER button. Press the button to select “Colour Tone”, then press the ENTER button.
Setting and Displaying the Current Time You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. Press the MENU button to display the menu.
Switching the Television On and Off Automatically You can set the On/Off timers so that the set will: Switch on automatically and tune to the channel of your choice at the time you select. Switch off automatically at the time you select. Press the MENU button to display the menu.
Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off".
Teletext Decoder Most set channels carry “ teletext ”, pages of written information that provide information such as: Television programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing. The teletext pages are organized according to six categories: Part Contents Selected page number.
Selecting a Specific Teletext Page Press the number buttons on the remote control to enter the page number directly: 1. Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. 2. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence.
Windows and your particular video card. Even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on “Control Panel” on the Windows start menu.
Setting the PC Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the fre- quency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
Compare these values with the data in the Display Modes. The TFT LCD panel uses a panel consisting of sub pixels (LA15S51BP - 2,359,296, LA20S51BP - 1,440,000, LS17M24CP - 3,932,160) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen.