5.
Install 4 anchor plugs in the holes on the floor.
Then, fasten the base stands to the floor with 4 screws (A).
Screw (A)
Washer
Anchor
Plug
6.
Remove the 4 tabs on the top cover of the Basic Shelf, by using a flathead screwdriver, as shown below.
Basic Shelf
3.2.7 Installation of 4-shelf System (Side-by-side Type)
Floor
Hammer
Anchor Plug
30 mm
8 mm
Screw (A)
Washer
Base
Stand
Installation Manual
95