Using Interactive Function; Connecting A Computer With A Usb Cable; Installing Interactive Presentation Utility - Sony VPL-SW535C Quick Reference Manual

Using Interactive Function

The Interactive function (VPL-SW535C/SW525C only) enables you to do the following:
• Draw shapes/write text on the screen with the Interactive Pen Device.
• Use the Interactive Pen Device as a mouse on the projected screen.
Notes
The Interactive Presentation function works by a detector in the projector, which picks up infrared
rays emitted from the tip of the Interactive Pen Device. Observe the precautions noted below.
• Avoid placing the projector where the Interactive Pen detector is directly exposed to fluorescent
light or other strong light.
• Do not cover the pen tip of the Interactive Pen Device or the Interactive Pen detector.
• Infrared data communication or noise from another device may cause improper operation.

Connecting a Computer with a USB Cable

Make sure your computer and the projector are connected with a computer cable. For details
on connecting the projector with a computer, see "Connecting the Projector".
Computer

Installing Interactive Presentation Utility

Use of these functions requires installation of Interactive Presentation Utility. For Interactive
Presentation Utility software update, visit Sony's web site.
https://www.servicesplus.sel.sony.com/
http://pro.sony.eu/InteractiveUtility
System Requirements
• CPU: Intel Pentium III 1.0GHz or faster
• Memory: 512MB or more
• Available hard drive space: 100MB or more
• Display: resolution higher than SVGA (800 × 600 pixels)
• Windows XP SP2 or later (Home/Professional Edition)*
• Windows Vista non-SP or later (Starter*
1
Enterprise)*
• Windows 7 (Starter*
*1: 32bit edition only
*2: 32bit edition and 64bit edition
*3: 32bit edition
Computer cable
USB connector
(Type A)
3
/Home Basic/Home Premium/Business/Ultimate/
3
/Home Basic/Home Premium/Professional/Ultimate/Enterprise)*
1
Using Interactive Function
2
17
GB