Power Button; Information Display - Mitsubishi Electric MJ-E14CG-S1-SWE Instruction Manual

Power lamp

Lights when unit is ON.

Power button


Use this to switch the
unit ON and OFF.
Tank full lamp

This lights up to warn that the
water tank is full.

Information display


Indicates room and unit
condition
Low Temperature
Indicator
The indicator comes on if the
room temperature drops below
15°C.
Activating LOW TEMP mode is
recommended.
14 14
Drying inside lamp

Flashes when drying inside in progress.
Drying inside button

Activate/deactivates drying inside.
Air purifier lamp

Lights during air purifier only operation.
Air purifier button

Switches to air purifier only operation.
You can select from 7 operating modes.
 EASY
1
DEHUMIDIFYING
 INTELLIGENT
LAUNDRY
 LOW
 MILDEW GUARD
1
 LOW TEMP
 AUTO
 AIR PURIFIER
DEFROST Indicator
Airflow (dehumidifying) will stop and the
frost that has accumulated inside will be
melted and dropped into the tank when
the indicator is on.
Please wait a moment as operation will
resume in around 5 minutes.
While in DEFROST mode, airflow
(dehumidifying) and the louvre will
stop. The sounds coming from the unit
will also change.
DEFROST will start automatically when
room temperature drops below 15°C
(This may be as often as once every 40
minutes).
1
15
All modes include
dehumidifier and air purifier
functions.
Air purifier only operation.
The dehumidifier function is
disabled.
High Humidity
Warning
The indicator flashes
when the unit is OFF and
the humidity in the room
exceeds 75%. Activating
the dehumidifier is
recommended when the
indicator is flashing.
If the High humidity warning
is not used, remove the
power plug from the power
socket.
9