Table of Contents
Advertisement
PC/VGA MODE
-
Connect a personal computer to this unit.
-
Power on your computer and this unit.
-
Press SOURCE on the unit or remote control to select the PC-RGB (VGA) input source.
-
Press MENU to display the main menu and select "PICTURE" using the LEFT/RIGHT navigation
button.
-
Use the UP/DOWN navigation button to highlight "SCREEN" and press OK or the RIGHT
navigation button to enter it.
-
Press the UP/DOWN navigation button to select your preferred item.
-
Press OK or the RIGHT navigation button to enter the submenu. Press the LEFT/RIGHT
navigation button to adjust the value.
1.
Auto Adjust
This item is used to adjust the PC screen automatically.
2.
H-Offset
This item is used to adjust the value of the horizontal position.
3.
V-Offset
This item is used to adjust the value of the vertical position.
4.
Size
This item is used to adjust the signal's transfer speed.
5.
Phase
This item is used to adjust the picture applying to the TV.
NOTE: For other menu operations in PC-RGB (VGA) mode, please refer to the menu operations of
the DTV mode.
37
Advertisement
Table of Contents
