3.1 Customising Your Phone (Personal Programming)
3.1.2
Settings on the Programming Mode
You can programme features using the programming mode.
–
Setting Features
–
Clearing Features
•
To exit at any time, lift the handset.
•
To enter the programming mode when using a PS, refer to "Operating Instructions" for PS.
Setting Features
The default settings are shown in bold letters. For later reference, place a check mark in the boxes below to
indicate your customised setting.
Notice
The default value may vary depending on country/area.
To enter the programming mode
PROGRAM
OR
PAUSE
Press PROGRAM
or PAUSE.
Item
Your extension information
Display Contrast Selection*
Preferred display contrast level
from the 4 levels available
196
User Manual
To programme
programming
OR
input
AUTO DIAL
STORE
Follow
Press ENTER
programming
or STORE.
input.
Programming
Input
0
0
1
0
1
selection &
parameter
Follow Selection
Press ENTER
& Parameter.
or STORE.
Selection & Parameter
PT: The display shows the PBX number, slot number
and port number. (Some IP-PTs may not display the
extension number.)
<example>
EXT1050:10308
PBX no.
Slot no.
PS: The display shows the PS number.
<example>
EXT3001:99001
1
2
3
4
To exit
PROGRAM
OR
OR
AUTO DIAL
PAUSE
STORE
Press PROGRAM
or PAUSE.
Port no.
PS no.
Light
Little Light
Little Dark
Dark