Using The Screen Settings - Sony BRAVIA KDL-32L5000 Operating Instruction

m
Using the Screen Settings
Option Description
Wide Mode
Auto Wide
Wide Zoom
Normal
Full
Zoom
On
Fills the screen with minimum distortion.
Select to display 4:3 picture in original size when the original source is 4:3.
Select to enlarge the picture horizontally to fill the screen when the
original source is 4:3 (Standard definition source). When the original
source is 10:9 (High-definition source), select this mode to display the
16:9
picture in its original size.
Select to enlarge the original picture without distorting the aspect ratio.
Select
On
to automatically change
Wide Mode
setting based on the
content.
Off
Off
Normal
Full
Zoom
4:3 Default
Select the default
Screen Mode to use
for 4:3 sources
Display Area
Horizontal
Center
Vertical Center
If frequent screen changes are disturbing to you, select
Off.
Choose a
Wide Mode
from the
Wide Mode
option when this function is
selected to
Off.
Wide Zoom
Enlarges the 4:3 picture to fill the
16:9
screen, displaying as much of the
original image as possible.
Select to display the 4:3 picture in its original size.
Select to enlarge the 4:3 picture horizontally only, to fill the display area.
Select to enlarge the picture horizontally and vertically to an equal aspect
ratio that fills the wide screen.
Select to continue using the current
Wide Mode
setting when the
channel or input is changed.
Normal
Displays the recommended picture area.
-11-2
Enlarges the picture to hide the edge of the picture.
Allows you to move the position of the picture left and right. (Available in
Wide Zoom
and
Zoom.)
Allows you to move the position of the picture up and down. (Available in
Wide
Zoom
and
Zoom.)
• Normal
is not available when you are watching a 720p, I080i or l080p source.
• If
4:3 Default
is set to anything but
Off,
the
Wide Mode
setting changes only for the current
channel. When you change channels (or inputs),
Wide Mode
is automatically replaced with the
4:3 Default
setting for 4:3 sources. To retain the current
Wide Mode
setting as channels and
inputs are changed, set
4:3 Default
to
Off.
• 4:3 Default
is not available if
Auto Wide
is set to
Off.
28