Changing A Lamp - Miele PUR 68 W Operating And Installation Instructions

Cleaning and care

Changing a lamp

The lamps should be replaced with a
lamp of the same type:
Manufacturer ............................... EGLO
Lamp type .................................... GU10
Specification................................ 11427
Wattage ........................................... 3 W
These lamps are available from Miele or
from specialist retailers.
 Switch off the fan and the lighting.
Note that lamps become very hot
when in use.
They can cause burns even after be-
ing switched off for some time.
Allow the lamps to cool down for a
few minutes before changing them.
 Disconnect the cooker hood from the
mains electrical supply (see "Warning
and Safety instructions").
24
 Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will then drop downwards.
 Grip the lamp, turn it anti-clockwise
and take it out.
 Screw the new lamp into the socket
and push it upwards. Please follow
the manufacturer's safety instruc-
tions.