Recommendations On Installation - Sony FWD-S42H1 Instruction Manual

Recommendations on installation

············································································································································································································
© Sony Professional Solutions Europe, Revised September 08 20 of 23
Provide an ample amount of space around the
display
• To prevent internal heat buildup from sealing off the
Display, make sure to ensure proper ventilation
by leaving open the minimum amount of space
around the display, as illustrated below.
• The ambient temperature must be 0 degrees C to 35
degrees C (32 degrees F to 95 degrees F). Be
careful when installing the display near a ceiling.
The temperature there can become much higher
than the normal, lower-level room temperature.
• When using the stand, make sure you use the
applicable Tabletop Stand SU-S01 (not
supplied). For the fitting method, see the
instruction manual of the Tabletop Stand.
• Regarding the installation of hardware such as
brackets, screws, or bolts, we cannot specify the
products. Actual installation is up to the
authorized local dealers. Consult with qualified
Sony personnel for installation.
• While the display is on, a certain amount of heat
builds up inside. This can cause burns. Avoid
touching the top or rear of the display when it is
powered on or just after it has entered standby
mode.
Sony Product Information
Category: PuD
Product: FWD-S42H1/S47H1