English - HP S9500 User Manual

1 2 3 4 5 6 7
8 9 -
q
2

English

English
Listen to high-quality audio from your Troubleshooting
Bluetooth compatible device on your
wireless speaker.
Problem: Bluetooth pairing and connection was
unsuccessful.
Power On/Off LED indicator
1
Solution: Add the Bluetooth device manually. Right-click
on the Start screen, and then click All apps > Control
Volume decrease button
2
Panel > Hardware and Sound > Add a device. Select the
Volume increase button
3
HP Bluetooth Speaker from the list.
Mute button
4
Problem: No sound from the speaker.
a. Press to mute and unmute the
device.
Solution: Verify that the system volume is turned on at
the system and turned to a high volume level. Make sure
b. Press and hold for 3 seconds to
the audio playback switch is set to Bluetooth Hands-free
switch between Music mode and
Speakers: Right-click on the Start screen, and then click
Movie - Surround mode.
All apps > Control Panel > Hardware and Sound >
Bluetooth pairing button
5
Manage audio devices.
Battery light You may also need to enable the listen to music option
6
a. Amber light is on when charging. within Bluetooth services after you have paired the device.
Under the Hardware and Sound heading of the Control
b. Green light is on when battery is full.
Panel, click Devices and Printers, right-click on the HP
c. Amber light is flashing when battery
Bluetooth Speaker, click Properties > Services, and then
is low.
select Listen to music.
Bluetooth light
7
a. Slow flashing light indicates the Problem: The NFC feature is not working.
Bluetooth devices is searching for
Solution: The NFC sensor establishes radio communication
a paired device.
between the pairing device and the speaker by touching
b. Fast flashing light indicates the
them together on the NFC sensor. Verify that your device
Bluetooth devices is in pairing mode.
supports NFC by activating its NFC feature. Then, touch the
NFC area on the speaker with your device. The speaker will
c. Constant light indicates the Bluetooth
device is connected. connect automatically if the device is compatible with the
NFC feature. If your device does not support NFC, you must
AUX-in jack
8
use the Bluetooth pairing process.
DC-in jack
9
Power switch
-
Near field communication (NFC) Sensor
q
1
Connect the AC adapter to the wall outlet.
2
Turn on the speaker.
3
Enable Bluetooth on your device. To receive the NFC signal, place your NFC device within the NFC sensor area.
4
Press any button on the top panel to activate the buttons.
5
Press the Bluetooth paring button . The Bluetooth light will blink rapidly. The speaker will play two beeps when
the speaker is paired correctly.
Note: The speaker will become idle if pairing is not successful within 2.5 minutes. You must repeat the
pairing process if this happens.
6
Verify that your notebook, tablet, or smart phone pairs with the speaker. If the system requests a pass code
during the pairing process, enter 0000.
Note: You may also use an optional audio cable to connect the speaker to your notebook,
tablet, or smart phone.
Regulatory and safety information
For regulatory and safety notices, refer to the Product Notices included with your product.
1
2
3
4
5
English 3