Print Server - D-Link DSL-2750U User Manual

DSL-2750U Wireless N ADSL2+ USB Modem Router
User Manual

Print Server

On the USB storage / Print-server page, you can configure the router as a print server. Being
configured in this way, the router will allow your LAN users to share the printer connected to the
USB port of the router.
To connect a printer to the router, power off both devices. Connect printer to the USB port of the
router, power on the printer, then power on the router.
To configure the router as a print server, select the Enable/Disable print-server checkbox and
click the Change button.
If you don't want to use the router as a print server, deselect the Enable/Disable print-server
checkbox and click the Change button.
Figure 110. The USB storage / Print-server page.
Page 150 of 174
Configuring via Web-based Interface