Panasonic KX-NS1000 Getting Started page 43

Note
By assigning the PBX's IP address to one IP-PT, it is possible to assign the PBX's IP address to other
IP-PTs or IP-CSs on the same LAN through system programming. For details, refer to "9.14 PBX
Configuration—Configuration—Slot—V-IPEXT32—Port Property—Option—
the PC Programming Manual.
KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address
Select "Default Gateway".
To enter the IP address of the PBX
Return to the
Menu screen.
ENTER
Continued on next page
Press "SETUP" when it is displayed.
ENTER Select "Disable"
for DHCP setting.
1
ENTER
Subnet Mask Address*
ENTER
Default Gateway Address*
ENTER
Software version 2.00 or later only
Select "PBX". ENTER
PBX IP Address
4.3.1 Assigning IP Addressing Information
SETUP
Select "IP Address".
2
ENTER
Select "PBX IP
Address".
ENTER
ANNOUNCE Mode" in
ENTER
ENTER
3
ENTER
Select "Primary
PBX".
Getting Started 43